PanaVise Circuit Board Holder Head Model #315
PanaVise Circuit Board Holder Head Model #315
Availability:
In Stock
Product SKU:
PV315
Prop 65
Warning
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
$48.99
Model #315 features:
• The two moveable arms extend 6" (154mm) from
the cross bar and have "V" shaped grooves which
securely hold the board edges.
• One arm is spring tensioned to equalize holding
pressure, and includes a lever which locks the
internal spring "open" for quick board insertion
and removal.
• "V" notches positioned laterally near the arms' tips
securely and conveniently hold small electronic
parts.
• Shaft is 4.125" (104.8mm) lang and 5/8" (15.9mm)
in diameter; compatible with any Model 300 Base .
• Height (bottom of shaft to tip of arms): 10.875"
(276.2mm).
• The two moveable arms extend 6" (154mm) from
the cross bar and have "V" shaped grooves which
securely hold the board edges.
• One arm is spring tensioned to equalize holding
pressure, and includes a lever which locks the
internal spring "open" for quick board insertion
and removal.
• "V" notches positioned laterally near the arms' tips
securely and conveniently hold small electronic
parts.
• Shaft is 4.125" (104.8mm) lang and 5/8" (15.9mm)
in diameter; compatible with any Model 300 Base .
• Height (bottom of shaft to tip of arms): 10.875"
(276.2mm).
Model #315 features:
• The two moveable arms extend 6" (154mm) from
the cross bar and have "V" shaped grooves which
securely hold the board edges.
• One arm is spring tensioned to equalize holding
pressure, and includes a lever which locks the
internal spring "open" for quick board insertion
and removal.
• "V" notches positioned laterally near the arms' tips
securely and conveniently hold small electronic
parts.
• Shaft is 4.125" (104.8mm) lang and 5/8" (15.9mm)
in diameter; compatible with any Model 300 Base .
• Height (bottom of shaft to tip of arms): 10.875"
(276.2mm).
• The two moveable arms extend 6" (154mm) from
the cross bar and have "V" shaped grooves which
securely hold the board edges.
• One arm is spring tensioned to equalize holding
pressure, and includes a lever which locks the
internal spring "open" for quick board insertion
and removal.
• "V" notches positioned laterally near the arms' tips
securely and conveniently hold small electronic
parts.
• Shaft is 4.125" (104.8mm) lang and 5/8" (15.9mm)
in diameter; compatible with any Model 300 Base .
• Height (bottom of shaft to tip of arms): 10.875"
(276.2mm).
Customer Reviews
No reviews yet
Write a review
