Same day shipping on most orders
Honda ZO-91 Ultrasonic Cutter
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
The Honda ZO-91 ultrasonic cutter uses 40,000 vibrations per second with non-audible sound to assist in making smooth cuts with significantly reduced friction. The ZO-91 is the latest ultrasonic cutter from Honda and incorporates the following features:
- Newly integrated High mode boosts the power of cutting (5 minutes duration).
- Unique "TAF" circuit keeps the output power stable and powerful.
- Unlike other models, there is no need to keep holding down the operation switch on the handpiece switch (turns off automatically after 10 minutes operation).
- High speed vibration, 40,000 cycle per second (40 kHz) assists smooth cutting with less pressure force.
- The main unit has a handpiece holder for safe placement while not in use.
Designed for Ultrasonic cutting of synthetic resin, Plastic. Epoxy putty, Paper, Cardboard, Chemical fiber/ cloth, Polyester putty, 3D printed material, and Silicone up to 3mm in thickness.
The Honda ZO-91 ultrasonic cutter is a great ultrasonic cutter unit for hobbyists, model makers, users trimming plastic printed parts, and various other cutting operations not requiring extended cutting sessions.
Note: The cutting experience described above may vary by the environment and hardness of the material. Normal mode runs for about 10 minutes. The high powered mode runs for about only 5 minutes due to rapid temperature rise in the transducer/handpiece. A heat sensor inside the handpiece will trip and shut down the ultrasonic vibration in the case of excessively high temperatures as a thermal protection circuit. The oscillation light flashes, indicating a cool down period is needed.
Specifications:
| Oscillation Frequency | 40kHz |
| Output Power | 30 W |
| Output Frequency | 40 kHz |
| Power Source (AC Adapter) | 100 - 240V AC, 50/60 Hz, 40 VA |
| Control Unit Dimensions | 173 × 89 × 76mm |
| Handpiece Dimensions | 32 Ø × 144mm (including blade) |
| Control Unit Weight | 260g |
| Handpiece Weight | 100g (including cable) |
The Honda ZO-91 ultrasonic cutter uses 40,000 vibrations per second with non-audible sound to assist in making smooth cuts with significantly reduced friction. The ZO-91 is the latest ultrasonic cutter from Honda and incorporates the following features:
- Newly integrated High mode boosts the power of cutting (5 minutes duration).
- Unique "TAF" circuit keeps the output power stable and powerful.
- Unlike other models, there is no need to keep holding down the operation switch on the handpiece switch (turns off automatically after 10 minutes operation).
- High speed vibration, 40,000 cycle per second (40 kHz) assists smooth cutting with less pressure force.
- The main unit has a handpiece holder for safe placement while not in use.
Designed for Ultrasonic cutting of synthetic resin, Plastic. Epoxy putty, Paper, Cardboard, Chemical fiber/ cloth, Polyester putty, 3D printed material, and Silicone up to 3mm in thickness.
The Honda ZO-91 ultrasonic cutter is a great ultrasonic cutter unit for hobbyists, model makers, users trimming plastic printed parts, and various other cutting operations not requiring extended cutting sessions.
Note: The cutting experience described above may vary by the environment and hardness of the material. Normal mode runs for about 10 minutes. The high powered mode runs for about only 5 minutes due to rapid temperature rise in the transducer/handpiece. A heat sensor inside the handpiece will trip and shut down the ultrasonic vibration in the case of excessively high temperatures as a thermal protection circuit. The oscillation light flashes, indicating a cool down period is needed.
Specifications:
| Oscillation Frequency | 40kHz |
| Output Power | 30 W |
| Output Frequency | 40 kHz |
| Power Source (AC Adapter) | 100 - 240V AC, 50/60 Hz, 40 VA |
| Control Unit Dimensions | 173 × 89 × 76mm |
| Handpiece Dimensions | 32 Ø × 144mm (including blade) |
| Control Unit Weight | 260g |
| Handpiece Weight | 100g (including cable) |
