Foredom® M.TXBH-EMX Bench Type Motor, EMX-1 Table Top Control, Square Drive Shafting, 115V
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
Foredom® M.TXBH-EMX Bench Type Motor, 115V, with heavy duty square drive sheath assembly and EMX-1 Table Top Control. This item does not include a handpiece or speed controller.
Please note that TXB and TXBH Motors are identical, however the TXB Series Motors are equipped with a heavier, S-10801TX Square Drive Sheath Assembly for large scale, more demanding jobs. Any of Foredom®'s four Square Drive Handpieces (sold separately) can be used with the square drive sheath assembly. M.TXBH-EMX Motor and Table Top Control are only available in 115V.
Foredom®'s C.EMX-1 speed control looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor’s shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads.
The M.TXBH Motor is Foredom®'s most powerful flex shaft machine with 1/3 HP*. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load.
2-Year Limited Warranty. Made in USA.
*Keep in mind that Foredom®'s motors are rated at continuous duty or maximum efficiency and NOT maximum output.
 |
WARNING: Read & understand all operation instructions / manuals before using this tool. Failure to follow operating instructions could result in serious injury or damage to equipment. |
Foredom® M.TXBH-EMX Bench Type Motor, 115V, with heavy duty square drive sheath assembly and EMX-1 Table Top Control. This item does not include a handpiece or speed controller.
Please note that TXB and TXBH Motors are identical, however the TXB Series Motors are equipped with a heavier, S-10801TX Square Drive Sheath Assembly for large scale, more demanding jobs. Any of Foredom®'s four Square Drive Handpieces (sold separately) can be used with the square drive sheath assembly. M.TXBH-EMX Motor and Table Top Control are only available in 115V.
Foredom®'s C.EMX-1 speed control looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor’s shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads.
The M.TXBH Motor is Foredom®'s most powerful flex shaft machine with 1/3 HP*. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load.
2-Year Limited Warranty. Made in USA.
*Keep in mind that Foredom®'s motors are rated at continuous duty or maximum efficiency and NOT maximum output.
|
|
WARNING: Read & understand all operation instructions / manuals before using this tool. Failure to follow operating instructions could result in serious injury or damage to equipment. |