Same day shipping on most orders
ARTCO M-1036 Replacement Parts
ARTCO M-1036 Replacement Parts
Availability:
In Stock
Product SKU:
RAX1A
Prop 65
Warning
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
$0.00
The M-1036 a 90° Right- Angle eXtendable handpiece adapts to most any flexible shaft system. A unique, telescoping feature allows the right-angle head to extend out an additional three inches, providing accessibility for hard-to-reach areas.
Especially suited for use in “blind spots,” recesses, and irregular shaped slots. Used extensively for mold cavity work and engine cylinder porting.
Replacement parts listed below.
Especially suited for use in “blind spots,” recesses, and irregular shaped slots. Used extensively for mold cavity work and engine cylinder porting.
Replacement parts listed below.
| Pos. No. |
Description |
Catalog Number |
|---|---|---|
| 1A |
R.A. Head Needle Bearing |
RAX1A |
| 1B |
R.A. Head Brass Bushing |
RAX1B |
| 1C |
R.A. Inner Head Assembly (1 pc each: RAX10, 11, 12,15 & 17) |
RAX1C |
| 1E |
R.A. Head Only | RAX1E |
| 2 |
Knurled Nut |
RAX2 |
| 3 |
Center Housing | RAX3 |
| 4 |
Aluminum Housing with Spring Clip and Ball |
RAX4 |
| 5A |
1/8"dia Collet |
RAX5A |
| 5B |
3/32"dia Collet | RAX5B |
| 6 |
R.A.Head Cover Plate |
RAX6 |
| 7 |
Keyway Spindle |
RAX7 |
| 8 |
Spindle Ball Bearing |
RAX8 |
| 9 |
Keyway Drive Nut |
RAX9 |
| 10 |
Snap Ring |
RAX10 |
| 11 |
R.A. Head Ball Bearing |
RAX11 |
| 12 |
R.A. Head Gear |
RAX12 |
| 13 |
Spindle Gear |
RAX13 |
| 15 |
Brass Ring & Spacer |
RAX15 |
| 16 |
Sliding Spindle |
RAX16 |
| 17 |
R.A. Head Collet Spindle |
RAX17 |
| 18 |
Hollow Axle with Needle Bearing |
RAX18 |
| 18A |
Needle Bearing for Hollow Axle (Not Shown in Diagram) |
RAX18A |
| - - - - |
Pin Mrench |
RAXPW |
| - - - - |
Collet Wrench |
RAXCW |
| - - - - |
Pin and Collet Wrench Set |
RAXWS |
The M-1036 a 90° Right- Angle eXtendable handpiece adapts to most any flexible shaft system. A unique, telescoping feature allows the right-angle head to extend out an additional three inches, providing accessibility for hard-to-reach areas.
Especially suited for use in “blind spots,” recesses, and irregular shaped slots. Used extensively for mold cavity work and engine cylinder porting.
Replacement parts listed below.
Especially suited for use in “blind spots,” recesses, and irregular shaped slots. Used extensively for mold cavity work and engine cylinder porting.
Replacement parts listed below.
| Pos. No. |
Description |
Catalog Number |
|---|---|---|
| 1A |
R.A. Head Needle Bearing |
RAX1A |
| 1B |
R.A. Head Brass Bushing |
RAX1B |
| 1C |
R.A. Inner Head Assembly (1 pc each: RAX10, 11, 12,15 & 17) |
RAX1C |
| 1E |
R.A. Head Only | RAX1E |
| 2 |
Knurled Nut |
RAX2 |
| 3 |
Center Housing | RAX3 |
| 4 |
Aluminum Housing with Spring Clip and Ball |
RAX4 |
| 5A |
1/8"dia Collet |
RAX5A |
| 5B |
3/32"dia Collet | RAX5B |
| 6 |
R.A.Head Cover Plate |
RAX6 |
| 7 |
Keyway Spindle |
RAX7 |
| 8 |
Spindle Ball Bearing |
RAX8 |
| 9 |
Keyway Drive Nut |
RAX9 |
| 10 |
Snap Ring |
RAX10 |
| 11 |
R.A. Head Ball Bearing |
RAX11 |
| 12 |
R.A. Head Gear |
RAX12 |
| 13 |
Spindle Gear |
RAX13 |
| 15 |
Brass Ring & Spacer |
RAX15 |
| 16 |
Sliding Spindle |
RAX16 |
| 17 |
R.A. Head Collet Spindle |
RAX17 |
| 18 |
Hollow Axle with Needle Bearing |
RAX18 |
| 18A |
Needle Bearing for Hollow Axle (Not Shown in Diagram) |
RAX18A |
| - - - - |
Pin Mrench |
RAXPW |
| - - - - |
Collet Wrench |
RAXCW |
| - - - - |
Pin and Collet Wrench Set |
RAXWS |