Same day shipping on most orders
Foredom® EMX-1 Dial Speed Control
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
Foredom® C.EMX-1 Speed Control solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit.
C.EMX-1 converts AC current from an electrical outlet to DC current- the type required by 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It has a special plug that fits the motor’s shielded plug. The C.EMX-1 has a replaceable fuse, CP10515, that protects the electronics during power surges and work overloads. CSA Listed.
For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors.
The C.EM-1 can also used with a Dremel 731 flex shaft tool to vary speed.
 |
WARNING: Read & understand all operation instructions / manuals before using this tool. Failure to follow operating instructions could result in serious injury or damage to equipment. |
Foredom® C.EMX-1 Speed Control solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit.
C.EMX-1 converts AC current from an electrical outlet to DC current- the type required by 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It has a special plug that fits the motor’s shielded plug. The C.EMX-1 has a replaceable fuse, CP10515, that protects the electronics during power surges and work overloads. CSA Listed.
For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors.
The C.EM-1 can also used with a Dremel 731 flex shaft tool to vary speed.
|
|
WARNING: Read & understand all operation instructions / manuals before using this tool. Failure to follow operating instructions could result in serious injury or damage to equipment. |
| Material | Heavy Duty plastic housing. |
|
Dimensions |
5" Long, 5-7/8″ Wide, 2-3/4″ High |
| Weight | 2 lb / 1 kg |
|
Input |
115V~, 60Hz |
|
Output |
3A |