Foredom® M.TXM Bench Style Dial Control Motor, Key Tip Shafting, 115V
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
Foredom® M.TXM Bench Style Dial Control Motor, 115V, with standard key tip shaft and sheath. This item does not include a handpiece.
Foredom® M.TXM Motor is equipped with a S-77 Outer Sheath and S-93 Inner Sheath for connecting any of Foredom®'s key tip compatible handpieces (sold separately). The M.TXM Motor contains an internal dial speed controller, this manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. M.TXM Motors are only available in 115V.
The M.TX Motor is Foredom®'s most powerful flex shaft machine with 1/3 HP*. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load.
2-Year Limited Warranty. Made in USA.
*Keep in mind that Foredom®'s motors are rated at continuous duty or maximum efficiency and NOT maximum output.
 |
WARNING: Read & understand all operation instructions / manuals before using this tool. Failure to follow operating instructions could result in serious injury or damage to equipment. |
Foredom® M.TXM Bench Style Dial Control Motor, 115V, with standard key tip shaft and sheath. This item does not include a handpiece.
Foredom® M.TXM Motor is equipped with a S-77 Outer Sheath and S-93 Inner Sheath for connecting any of Foredom®'s key tip compatible handpieces (sold separately). The M.TXM Motor contains an internal dial speed controller, this manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. M.TXM Motors are only available in 115V.
The M.TX Motor is Foredom®'s most powerful flex shaft machine with 1/3 HP*. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load.
2-Year Limited Warranty. Made in USA.
*Keep in mind that Foredom®'s motors are rated at continuous duty or maximum efficiency and NOT maximum output.
|
|
WARNING: Read & understand all operation instructions / manuals before using this tool. Failure to follow operating instructions could result in serious injury or damage to equipment. |