Sonofile SH3510-SF8541 Ultrasonic Cutting System - 500W
Sonofile SH3510-SF8541 Ultrasonic Cutting System - 500W
Availability:
In Stock
Product SKU:
SH-3510+SF8541
Prop 65
Warning
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
$14,214.40
High-power ultrasonic cutter with maximum power output of 500 W..
Oscillator with maximum power output of 500 W enables powerful cutting of difficult-to-cut and extra-tough materials. Abrasion resistant carbide blade with 1 mm thickness can be used. Signals for on/off, emergency stop, change of output level, and other features with automated machinery or industrial robots can be performed.
SH-3510 Oscillator Features
• High-power ultrasonic cutter with maximum power output of 500 W is compatible with materials needing high-power cutting.
• Takes carbide and large blades.
• Mountable on automated machinery/industrial robots.
SH-3510 Oscillator Specification:
• Frequency Adjustment: Auto-tracking Type
• Maximum Power Output: 500 W
• Power Output Adjustment: Infinitive Adjustment
• Power Supply: AC200V 50/60Hz
• Electricity Consumption: 1000 VA
• Outer Dimension: 300W x 400D x 200H (mm)
• Weight: 10 kg.
• Sonofile Catalog Number: SF-3510
SF-8541RR Transducer Features:
An even more compact and powerful high frequency ultrasonic cutter than previous models result in a sharper cut. User-friendly design fully utilizes the robot's operation area. A forced cooling system with air inlet enables extended continuous use.
SF-8541RR Transducer Specification:
• Frequency: 40 kHz
• Vibration Element: PZT Piezoelectric Transducer
• Standard 5 meter Cord: (Cords are also available in 6, 8 and 10 meters)
• Tool Attachment Screw: M6
• Housing Material: SUS303
• Outer Dimension: 10W x 42D x 175L (mm)
• Weight: 660 g.
• Blade Thickness: 0.6mm (a blade suitable for your application can be manufactured from 0.4mm and up in thickness)
• Sonofile Catalog Number: SF-8541RR
Applicable Materials
• A range of pre-pregs (boron, Kevlar, polyethylene fiber, etc.).
• Rubber (vulcanized latex, non-vulcanized latex, sheeting material, sealing material, and tube)
• Thermoplastics (board, sheeting material, film, laminated material).
Included Equipment:
• SH-3510 Oscillator.
• SF-8541RR Transducer with Standard 5 meter Cord.
• FB-3136-6L4 0.6mm thick HSS Blade: 5 pcs.
• Square Head Screw: 1 pc. (#7508) M3x8 (Steel 3mm Square Head & spare screw).
• Square Hold Driver: 1 pc. (#7509) Square hole 3mm (75mm T-shape)
• Transducer Cord: 1 pc. (6x5mm Rotary Connector - Angle or Straight)
• Connect Plug (Robot): 1 pc. (#7531) ELP-15V
• Fuse: 2 pcs. (#7552) 5A-250V - 5x230 spare fuse
• Power Cord: 1 pc. (#7104) 200V with hanging type cord connector body.
Please Note:
Sonofile Systems are made to order FOB Japan - please allow 2-3 weeks for delivery.
Oscillator with maximum power output of 500 W enables powerful cutting of difficult-to-cut and extra-tough materials. Abrasion resistant carbide blade with 1 mm thickness can be used. Signals for on/off, emergency stop, change of output level, and other features with automated machinery or industrial robots can be performed.
SH-3510 Oscillator Features
• High-power ultrasonic cutter with maximum power output of 500 W is compatible with materials needing high-power cutting.
• Takes carbide and large blades.
• Mountable on automated machinery/industrial robots.
SH-3510 Oscillator Specification:
• Frequency Adjustment: Auto-tracking Type
• Maximum Power Output: 500 W
• Power Output Adjustment: Infinitive Adjustment
• Power Supply: AC200V 50/60Hz
• Electricity Consumption: 1000 VA
• Outer Dimension: 300W x 400D x 200H (mm)
• Weight: 10 kg.
• Sonofile Catalog Number: SF-3510
SF-8541RR Transducer Features:
An even more compact and powerful high frequency ultrasonic cutter than previous models result in a sharper cut. User-friendly design fully utilizes the robot's operation area. A forced cooling system with air inlet enables extended continuous use.
SF-8541RR Transducer Specification:
• Frequency: 40 kHz
• Vibration Element: PZT Piezoelectric Transducer
• Standard 5 meter Cord: (Cords are also available in 6, 8 and 10 meters)
• Tool Attachment Screw: M6
• Housing Material: SUS303
• Outer Dimension: 10W x 42D x 175L (mm)
• Weight: 660 g.
• Blade Thickness: 0.6mm (a blade suitable for your application can be manufactured from 0.4mm and up in thickness)
• Sonofile Catalog Number: SF-8541RR
Applicable Materials
• A range of pre-pregs (boron, Kevlar, polyethylene fiber, etc.).
• Rubber (vulcanized latex, non-vulcanized latex, sheeting material, sealing material, and tube)
• Thermoplastics (board, sheeting material, film, laminated material).
Included Equipment:
• SH-3510 Oscillator.
• SF-8541RR Transducer with Standard 5 meter Cord.
• FB-3136-6L4 0.6mm thick HSS Blade: 5 pcs.
• Square Head Screw: 1 pc. (#7508) M3x8 (Steel 3mm Square Head & spare screw).
• Square Hold Driver: 1 pc. (#7509) Square hole 3mm (75mm T-shape)
• Transducer Cord: 1 pc. (6x5mm Rotary Connector - Angle or Straight)
• Connect Plug (Robot): 1 pc. (#7531) ELP-15V
• Fuse: 2 pcs. (#7552) 5A-250V - 5x230 spare fuse
• Power Cord: 1 pc. (#7104) 200V with hanging type cord connector body.
Please Note:
Sonofile Systems are made to order FOB Japan - please allow 2-3 weeks for delivery.
High-power ultrasonic cutter with maximum power output of 500 W..
Oscillator with maximum power output of 500 W enables powerful cutting of difficult-to-cut and extra-tough materials. Abrasion resistant carbide blade with 1 mm thickness can be used. Signals for on/off, emergency stop, change of output level, and other features with automated machinery or industrial robots can be performed.
SH-3510 Oscillator Features
• High-power ultrasonic cutter with maximum power output of 500 W is compatible with materials needing high-power cutting.
• Takes carbide and large blades.
• Mountable on automated machinery/industrial robots.
SH-3510 Oscillator Specification:
• Frequency Adjustment: Auto-tracking Type
• Maximum Power Output: 500 W
• Power Output Adjustment: Infinitive Adjustment
• Power Supply: AC200V 50/60Hz
• Electricity Consumption: 1000 VA
• Outer Dimension: 300W x 400D x 200H (mm)
• Weight: 10 kg.
• Sonofile Catalog Number: SF-3510
SF-8541RR Transducer Features:
An even more compact and powerful high frequency ultrasonic cutter than previous models result in a sharper cut. User-friendly design fully utilizes the robot's operation area. A forced cooling system with air inlet enables extended continuous use.
SF-8541RR Transducer Specification:
• Frequency: 40 kHz
• Vibration Element: PZT Piezoelectric Transducer
• Standard 5 meter Cord: (Cords are also available in 6, 8 and 10 meters)
• Tool Attachment Screw: M6
• Housing Material: SUS303
• Outer Dimension: 10W x 42D x 175L (mm)
• Weight: 660 g.
• Blade Thickness: 0.6mm (a blade suitable for your application can be manufactured from 0.4mm and up in thickness)
• Sonofile Catalog Number: SF-8541RR
Applicable Materials
• A range of pre-pregs (boron, Kevlar, polyethylene fiber, etc.).
• Rubber (vulcanized latex, non-vulcanized latex, sheeting material, sealing material, and tube)
• Thermoplastics (board, sheeting material, film, laminated material).
Included Equipment:
• SH-3510 Oscillator.
• SF-8541RR Transducer with Standard 5 meter Cord.
• FB-3136-6L4 0.6mm thick HSS Blade: 5 pcs.
• Square Head Screw: 1 pc. (#7508) M3x8 (Steel 3mm Square Head & spare screw).
• Square Hold Driver: 1 pc. (#7509) Square hole 3mm (75mm T-shape)
• Transducer Cord: 1 pc. (6x5mm Rotary Connector - Angle or Straight)
• Connect Plug (Robot): 1 pc. (#7531) ELP-15V
• Fuse: 2 pcs. (#7552) 5A-250V - 5x230 spare fuse
• Power Cord: 1 pc. (#7104) 200V with hanging type cord connector body.
Please Note:
Sonofile Systems are made to order FOB Japan - please allow 2-3 weeks for delivery.
Oscillator with maximum power output of 500 W enables powerful cutting of difficult-to-cut and extra-tough materials. Abrasion resistant carbide blade with 1 mm thickness can be used. Signals for on/off, emergency stop, change of output level, and other features with automated machinery or industrial robots can be performed.
SH-3510 Oscillator Features
• High-power ultrasonic cutter with maximum power output of 500 W is compatible with materials needing high-power cutting.
• Takes carbide and large blades.
• Mountable on automated machinery/industrial robots.
SH-3510 Oscillator Specification:
• Frequency Adjustment: Auto-tracking Type
• Maximum Power Output: 500 W
• Power Output Adjustment: Infinitive Adjustment
• Power Supply: AC200V 50/60Hz
• Electricity Consumption: 1000 VA
• Outer Dimension: 300W x 400D x 200H (mm)
• Weight: 10 kg.
• Sonofile Catalog Number: SF-3510
SF-8541RR Transducer Features:
An even more compact and powerful high frequency ultrasonic cutter than previous models result in a sharper cut. User-friendly design fully utilizes the robot's operation area. A forced cooling system with air inlet enables extended continuous use.
SF-8541RR Transducer Specification:
• Frequency: 40 kHz
• Vibration Element: PZT Piezoelectric Transducer
• Standard 5 meter Cord: (Cords are also available in 6, 8 and 10 meters)
• Tool Attachment Screw: M6
• Housing Material: SUS303
• Outer Dimension: 10W x 42D x 175L (mm)
• Weight: 660 g.
• Blade Thickness: 0.6mm (a blade suitable for your application can be manufactured from 0.4mm and up in thickness)
• Sonofile Catalog Number: SF-8541RR
Applicable Materials
• A range of pre-pregs (boron, Kevlar, polyethylene fiber, etc.).
• Rubber (vulcanized latex, non-vulcanized latex, sheeting material, sealing material, and tube)
• Thermoplastics (board, sheeting material, film, laminated material).
Included Equipment:
• SH-3510 Oscillator.
• SF-8541RR Transducer with Standard 5 meter Cord.
• FB-3136-6L4 0.6mm thick HSS Blade: 5 pcs.
• Square Head Screw: 1 pc. (#7508) M3x8 (Steel 3mm Square Head & spare screw).
• Square Hold Driver: 1 pc. (#7509) Square hole 3mm (75mm T-shape)
• Transducer Cord: 1 pc. (6x5mm Rotary Connector - Angle or Straight)
• Connect Plug (Robot): 1 pc. (#7531) ELP-15V
• Fuse: 2 pcs. (#7552) 5A-250V - 5x230 spare fuse
• Power Cord: 1 pc. (#7104) 200V with hanging type cord connector body.
Please Note:
Sonofile Systems are made to order FOB Japan - please allow 2-3 weeks for delivery.
