Sonofile SF30-HP660 Ultrasonic Cutting System - 45W - 40 kHz.
Sonofile SF30-HP660 Ultrasonic Cutting System - 45W - 40 kHz.
Availability:
In Stock
Product SKU:
SF-30II+HP-660
Prop 65
Warning
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
$3,254.00
Gives you the freedom of high-speed, microscopic ultrasonic vibrations.
High-frequency ultrasonic cutter with a vibration frequency of 40 kHz (40,000 vibrations per second) and an amplitude of 30 microns maximizes the effect of ultrasonic vibrations that are high-speed and microscopic. A wide range of materials, including newly-developed composite materials, rubber and leather can be cut freely with low processing pressure, a sharp cutting edge, and little dust.
SF-30 Oscillator Features
• Stable vibrations with a maximum amplitude of 30 microns ensures remarkable cutting performance.
SF-30 Oscillator Specification:
• Frequency Adjustment: Auto-tracking Type
• Maximum Power Output: 45 W
• Power Output Adjustment: two-stage ( High / Low )
• Power Supply: AC100V 50/60Hz
• Electricity Consumption: 100 VA
• Outer Dimension: 170W x 180D x 70H (mm)
• Weight: 1.5 kg.
• Sonofile Catalog Number: SF-30
HP-660 Transducer Specification:
• Vibration Element: PZT Piezoelectric Transducer
• Standard 4 meter Cord: (Cords are also available in 6, 8 and 10 meters)
• Tool Attachment Screw: M6
• Housing Material: Polyoxymethylene (Duracon)
• Outer Dimension: 22W x 40D x 150.6L (mm)
• Weight:145 g.
• Blade Thickness: Sole use for 0.4mm (can be manufactured from 0.5mm and 0.6mm in thickness)
• Protective Cap included.
• Sonofile Catalog Number: HP-660
Applicable Materials
• A range of pre-pregs (boron, Kevlar, polyethylene fiber, etc.).
• Rubber (vulcanized latex, non-vulcanized latex, sheeting material, sealing material, and tube)
• Leather (natural and artificial).
• Thermoplastics (board, sheeting material, film, laminated material, and floor cover).
• Cloth, non-woven fabric and paper (specially treated paper and coated paper).
Included Equipment:
• SF-30 Oscillator.
• HP-660 Transducer with Standard 4 meter Cord.
• FB-3134 - 0.4mm thick HSS Blade: 2 pcs.
• Square Head Screw: 1 pc. (#7508) M3x8 (Steel 3mm Square Head)
• Square Hold Driver: 1 pc. (#7509) Square hole 3mm (75mm T-shape)
• Fuse: 2 pcs. (#7551) (2A-250V 5x20 spare fuse)
• Power Cord: 1 pc. (#7101) Single phase 115V for USA.
Please Note:
Sonofile Systems are made to order FOB Japan - please allow 2-3 weeks for delivery.
High-frequency ultrasonic cutter with a vibration frequency of 40 kHz (40,000 vibrations per second) and an amplitude of 30 microns maximizes the effect of ultrasonic vibrations that are high-speed and microscopic. A wide range of materials, including newly-developed composite materials, rubber and leather can be cut freely with low processing pressure, a sharp cutting edge, and little dust.
SF-30 Oscillator Features
• Stable vibrations with a maximum amplitude of 30 microns ensures remarkable cutting performance.
SF-30 Oscillator Specification:
• Frequency Adjustment: Auto-tracking Type
• Maximum Power Output: 45 W
• Power Output Adjustment: two-stage ( High / Low )
• Power Supply: AC100V 50/60Hz
• Electricity Consumption: 100 VA
• Outer Dimension: 170W x 180D x 70H (mm)
• Weight: 1.5 kg.
• Sonofile Catalog Number: SF-30
HP-660 Transducer Specification:
• Vibration Element: PZT Piezoelectric Transducer
• Standard 4 meter Cord: (Cords are also available in 6, 8 and 10 meters)
• Tool Attachment Screw: M6
• Housing Material: Polyoxymethylene (Duracon)
• Outer Dimension: 22W x 40D x 150.6L (mm)
• Weight:145 g.
• Blade Thickness: Sole use for 0.4mm (can be manufactured from 0.5mm and 0.6mm in thickness)
• Protective Cap included.
• Sonofile Catalog Number: HP-660
Applicable Materials
• A range of pre-pregs (boron, Kevlar, polyethylene fiber, etc.).
• Rubber (vulcanized latex, non-vulcanized latex, sheeting material, sealing material, and tube)
• Leather (natural and artificial).
• Thermoplastics (board, sheeting material, film, laminated material, and floor cover).
• Cloth, non-woven fabric and paper (specially treated paper and coated paper).
Included Equipment:
• SF-30 Oscillator.
• HP-660 Transducer with Standard 4 meter Cord.
• FB-3134 - 0.4mm thick HSS Blade: 2 pcs.
• Square Head Screw: 1 pc. (#7508) M3x8 (Steel 3mm Square Head)
• Square Hold Driver: 1 pc. (#7509) Square hole 3mm (75mm T-shape)
• Fuse: 2 pcs. (#7551) (2A-250V 5x20 spare fuse)
• Power Cord: 1 pc. (#7101) Single phase 115V for USA.
Please Note:
Sonofile Systems are made to order FOB Japan - please allow 2-3 weeks for delivery.
Gives you the freedom of high-speed, microscopic ultrasonic vibrations.
High-frequency ultrasonic cutter with a vibration frequency of 40 kHz (40,000 vibrations per second) and an amplitude of 30 microns maximizes the effect of ultrasonic vibrations that are high-speed and microscopic. A wide range of materials, including newly-developed composite materials, rubber and leather can be cut freely with low processing pressure, a sharp cutting edge, and little dust.
SF-30 Oscillator Features
• Stable vibrations with a maximum amplitude of 30 microns ensures remarkable cutting performance.
SF-30 Oscillator Specification:
• Frequency Adjustment: Auto-tracking Type
• Maximum Power Output: 45 W
• Power Output Adjustment: two-stage ( High / Low )
• Power Supply: AC100V 50/60Hz
• Electricity Consumption: 100 VA
• Outer Dimension: 170W x 180D x 70H (mm)
• Weight: 1.5 kg.
• Sonofile Catalog Number: SF-30
HP-660 Transducer Specification:
• Vibration Element: PZT Piezoelectric Transducer
• Standard 4 meter Cord: (Cords are also available in 6, 8 and 10 meters)
• Tool Attachment Screw: M6
• Housing Material: Polyoxymethylene (Duracon)
• Outer Dimension: 22W x 40D x 150.6L (mm)
• Weight:145 g.
• Blade Thickness: Sole use for 0.4mm (can be manufactured from 0.5mm and 0.6mm in thickness)
• Protective Cap included.
• Sonofile Catalog Number: HP-660
Applicable Materials
• A range of pre-pregs (boron, Kevlar, polyethylene fiber, etc.).
• Rubber (vulcanized latex, non-vulcanized latex, sheeting material, sealing material, and tube)
• Leather (natural and artificial).
• Thermoplastics (board, sheeting material, film, laminated material, and floor cover).
• Cloth, non-woven fabric and paper (specially treated paper and coated paper).
Included Equipment:
• SF-30 Oscillator.
• HP-660 Transducer with Standard 4 meter Cord.
• FB-3134 - 0.4mm thick HSS Blade: 2 pcs.
• Square Head Screw: 1 pc. (#7508) M3x8 (Steel 3mm Square Head)
• Square Hold Driver: 1 pc. (#7509) Square hole 3mm (75mm T-shape)
• Fuse: 2 pcs. (#7551) (2A-250V 5x20 spare fuse)
• Power Cord: 1 pc. (#7101) Single phase 115V for USA.
Please Note:
Sonofile Systems are made to order FOB Japan - please allow 2-3 weeks for delivery.
High-frequency ultrasonic cutter with a vibration frequency of 40 kHz (40,000 vibrations per second) and an amplitude of 30 microns maximizes the effect of ultrasonic vibrations that are high-speed and microscopic. A wide range of materials, including newly-developed composite materials, rubber and leather can be cut freely with low processing pressure, a sharp cutting edge, and little dust.
SF-30 Oscillator Features
• Stable vibrations with a maximum amplitude of 30 microns ensures remarkable cutting performance.
SF-30 Oscillator Specification:
• Frequency Adjustment: Auto-tracking Type
• Maximum Power Output: 45 W
• Power Output Adjustment: two-stage ( High / Low )
• Power Supply: AC100V 50/60Hz
• Electricity Consumption: 100 VA
• Outer Dimension: 170W x 180D x 70H (mm)
• Weight: 1.5 kg.
• Sonofile Catalog Number: SF-30
HP-660 Transducer Specification:
• Vibration Element: PZT Piezoelectric Transducer
• Standard 4 meter Cord: (Cords are also available in 6, 8 and 10 meters)
• Tool Attachment Screw: M6
• Housing Material: Polyoxymethylene (Duracon)
• Outer Dimension: 22W x 40D x 150.6L (mm)
• Weight:145 g.
• Blade Thickness: Sole use for 0.4mm (can be manufactured from 0.5mm and 0.6mm in thickness)
• Protective Cap included.
• Sonofile Catalog Number: HP-660
Applicable Materials
• A range of pre-pregs (boron, Kevlar, polyethylene fiber, etc.).
• Rubber (vulcanized latex, non-vulcanized latex, sheeting material, sealing material, and tube)
• Leather (natural and artificial).
• Thermoplastics (board, sheeting material, film, laminated material, and floor cover).
• Cloth, non-woven fabric and paper (specially treated paper and coated paper).
Included Equipment:
• SF-30 Oscillator.
• HP-660 Transducer with Standard 4 meter Cord.
• FB-3134 - 0.4mm thick HSS Blade: 2 pcs.
• Square Head Screw: 1 pc. (#7508) M3x8 (Steel 3mm Square Head)
• Square Hold Driver: 1 pc. (#7509) Square hole 3mm (75mm T-shape)
• Fuse: 2 pcs. (#7551) (2A-250V 5x20 spare fuse)
• Power Cord: 1 pc. (#7101) Single phase 115V for USA.
Please Note:
Sonofile Systems are made to order FOB Japan - please allow 2-3 weeks for delivery.
