NSK Nakanishi Sheenus Neo Ultrasonic Polishing System 8094
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
The NSK Nakanishi Sheenus Neo Ultrasonic Polishing System can be used for grinding, polishing and mirror finishing on a wide range of materials from aluminum dies to cemented carbide dies. It is also perfect for plastic molds, press, casting, forging, trimming and header dies. This tool can quickly remove hard layers of EDM deposits and polishes difficult areas such as complex corners and ribs. The capabilities of the NSK Nakanishi Sheenus neo system include bur removal, grinding and polishing of precision molds, dies electronic and ceramic components. Please note Control Unit, Foot Control and Handpiece may be purchased separately below.
Specifications:
• Unit Model: NE240
• Power Source: AC120V, 50-60Hz
• Power Consumption: 100VA
• Dimensions: W8.86" x D7.68" x H3.82"
• Oscillation Frequency: 22.5KHz (center frequency)
• Power Conditioning: Continuous variable type
• Frequency Control: Homing type
• Output Power: High Mode - Max. 45W, Low Mode - Max. 20W
• Handpiece Model: US-25PB
• Oscillator: PZT piezoelectric type
• Attachment fixing: M6 screw
• Cable Length: 6 ft.
• Dimensions: ø0.63" (Max. ø1.10") x L5.28"
• Weight: 4.94 oz. (excluding cable)
Included Equipment:
• Control Unit (NE240)
• Ultrasonic Handpiece (US-25PB)
• Accessory special tools (Holder - 1 pc., Ceramic fiber grindstone - 1 pc., Electroplated diamond file - 2 pcs., M4 screw joint adaptor - 1 pc.): 1 set
• Tool box (plastic): 1 pc.
• Handpiece stand (Z095201): 1 pc.
• Wrench (10 mm)
• Allen Wrench (2.5 mm)
• Foot Pedal (FC-24): 1 pc.
The NSK Nakanishi Sheenus Neo Ultrasonic Polishing System can be used for grinding, polishing and mirror finishing on a wide range of materials from aluminum dies to cemented carbide dies. It is also perfect for plastic molds, press, casting, forging, trimming and header dies. This tool can quickly remove hard layers of EDM deposits and polishes difficult areas such as complex corners and ribs. The capabilities of the NSK Nakanishi Sheenus neo system include bur removal, grinding and polishing of precision molds, dies electronic and ceramic components. Please note Control Unit, Foot Control and Handpiece may be purchased separately below.
Specifications:
• Unit Model: NE240
• Power Source: AC120V, 50-60Hz
• Power Consumption: 100VA
• Dimensions: W8.86" x D7.68" x H3.82"
• Oscillation Frequency: 22.5KHz (center frequency)
• Power Conditioning: Continuous variable type
• Frequency Control: Homing type
• Output Power: High Mode - Max. 45W, Low Mode - Max. 20W
• Handpiece Model: US-25PB
• Oscillator: PZT piezoelectric type
• Attachment fixing: M6 screw
• Cable Length: 6 ft.
• Dimensions: ø0.63" (Max. ø1.10") x L5.28"
• Weight: 4.94 oz. (excluding cable)
Included Equipment:
• Control Unit (NE240)
• Ultrasonic Handpiece (US-25PB)
• Accessory special tools (Holder - 1 pc., Ceramic fiber grindstone - 1 pc., Electroplated diamond file - 2 pcs., M4 screw joint adaptor - 1 pc.): 1 set
• Tool box (plastic): 1 pc.
• Handpiece stand (Z095201): 1 pc.
• Wrench (10 mm)
• Allen Wrench (2.5 mm)
• Foot Pedal (FC-24): 1 pc.
