NSK Nakanishi Preset Adapter QC3-ADP for QC3 Collet Holder
NSK Nakanishi Preset Adapter QC3-ADP for QC3 Collet Holder
Availability:
In Stock
Product SKU:
9211
Prop 65
Warning
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
NSK Nakanishi Preset Adapter QC3-ADP for QC3 Collet Holders
• Insert the tool holder into the Preset Adapter.
• Align the tool holder with the drive dog notches in the Preset Adapter.
• Attached the Collet Nut and the Collet Chuck to the tool holder.
• Lightly finger tighten the Collet Nut.
• Insert the cutting tool into the Collet Chuck.
• Place the wrenches on the Collet Nut and Collet Holder and securely tighten in a clockwise direction.
• NSK Catalog Number: 9211
• Insert the tool holder into the Preset Adapter.
• Align the tool holder with the drive dog notches in the Preset Adapter.
• Attached the Collet Nut and the Collet Chuck to the tool holder.
• Lightly finger tighten the Collet Nut.
• Insert the cutting tool into the Collet Chuck.
• Place the wrenches on the Collet Nut and Collet Holder and securely tighten in a clockwise direction.
• NSK Catalog Number: 9211
NSK Nakanishi Preset Adapter QC3-ADP for QC3 Collet Holders
• Insert the tool holder into the Preset Adapter.
• Align the tool holder with the drive dog notches in the Preset Adapter.
• Attached the Collet Nut and the Collet Chuck to the tool holder.
• Lightly finger tighten the Collet Nut.
• Insert the cutting tool into the Collet Chuck.
• Place the wrenches on the Collet Nut and Collet Holder and securely tighten in a clockwise direction.
• NSK Catalog Number: 9211
• Insert the tool holder into the Preset Adapter.
• Align the tool holder with the drive dog notches in the Preset Adapter.
• Attached the Collet Nut and the Collet Chuck to the tool holder.
• Lightly finger tighten the Collet Nut.
• Insert the cutting tool into the Collet Chuck.
• Place the wrenches on the Collet Nut and Collet Holder and securely tighten in a clockwise direction.
• NSK Catalog Number: 9211
