NSK Nakanishi MFC300S Mini 90° Angle Attachment
Note: When using the MFC-300S with a Rotus system you must use a Speed Reducer.
Maximum Allowable Speed: 15,000rpm Max (Intermittent Use)
• Minimum Inner Diameter: Ø 0.79"
• Weight : 1.76 oz.
• Collet Chuck Standard Size : Ø 1.6 mm (K-252)
• NSK Catalog Number: RE10247
Included Equipment:
• Collet Chuck Ø 1.6 mm (K-252): 1 PC
• Chuck Wrench (K-232): 1 PC
• Pin Wrench (K-233) : 1 PC
NSK Nakanishi MFC300S Mini 90° Angle Attachment
Availability:
In Stock
Product SKU:
MFC-300S
Prop 65
Warning
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
This NSK attachment for Electer Emax and Rotus systems is ideal for chamfering small interior cross-holes. Please note this system only allows 1/16" (1.6mm) shanked tools.
Note: When using the MFC-300S with a Rotus system you must use a Speed Reducer.
Maximum Allowable Speed: 15,000rpm Max (Intermittent Use)
• Minimum Inner Diameter: Ø 0.79"
• Weight : 1.76 oz.
• Collet Chuck Standard Size : Ø 1.6 mm (K-252)
• NSK Catalog Number: RE10247
Included Equipment:
• Collet Chuck Ø 1.6 mm (K-252): 1 PC
• Chuck Wrench (K-232): 1 PC
• Pin Wrench (K-233) : 1 PC
This NSK attachment for Electer Emax and Rotus systems is ideal for chamfering small interior cross-holes. Please note this system only allows 1/16" (1.6mm) shanked tools.
Note: When using the MFC-300S with a Rotus system you must use a Speed Reducer.
Maximum Allowable Speed: 15,000rpm Max (Intermittent Use)
• Minimum Inner Diameter: Ø 0.79"
• Weight : 1.76 oz.
• Collet Chuck Standard Size : Ø 1.6 mm (K-252)
• NSK Catalog Number: RE10247
Included Equipment:
• Collet Chuck Ø 1.6 mm (K-252): 1 PC
• Chuck Wrench (K-232): 1 PC
• Pin Wrench (K-233) : 1 PC
Note: When using the MFC-300S with a Rotus system you must use a Speed Reducer.
Maximum Allowable Speed: 15,000rpm Max (Intermittent Use)
• Minimum Inner Diameter: Ø 0.79"
• Weight : 1.76 oz.
• Collet Chuck Standard Size : Ø 1.6 mm (K-252)
• NSK Catalog Number: RE10247
Included Equipment:
• Collet Chuck Ø 1.6 mm (K-252): 1 PC
• Chuck Wrench (K-232): 1 PC
• Pin Wrench (K-233) : 1 PC