NSK Nakanishi IC300 90° Angle Attachment
NSK Nakanishi IC300 90° Angle Attachment
Availability:
In Stock
Product SKU:
IC-300
Prop 65
Warning
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
This NSK Nakanishi 90° Angle attachment comes with a ø1/8" (ø3.175 mm) Collet Chuck. This NSK Nakanishi attachment is most suitable for polishing flat surfaces, corners and internal surfaces of pipes with paper disk mounted on rubber pad.
Note: When using the IC-300 with a Rotus system you must use a Speed Reducer.
Maximum Allowable Speed: 35,000rpm Max (Intermittent Use)
Maximum Allowable Speed: 20,000rpm Max (Continuous Use)
• Reduction Ratio : 3/4
• Weight : 1.6 oz.
• Collet Chuck Standard Size : ø1/8" (CHC-3.175)
• NSK Catalog Number: RE10182
Includes:
• Collet Chuck ø1/8" (CHC-3.175) : 1 pc.
• Standard Accessories : 1 set
• Chuck Wrench (K-231) : 1 pc.
• Pin Wrench (K-233) : 1 pc.
Optional Accessories:
• CHC Collet Chucks ø1/16", 3/32", & 3.0mm
Note: When using the IC-300 with a Rotus system you must use a Speed Reducer.
Maximum Allowable Speed: 35,000rpm Max (Intermittent Use)
Maximum Allowable Speed: 20,000rpm Max (Continuous Use)
• Reduction Ratio : 3/4
• Weight : 1.6 oz.
• Collet Chuck Standard Size : ø1/8" (CHC-3.175)
• NSK Catalog Number: RE10182
Includes:
• Collet Chuck ø1/8" (CHC-3.175) : 1 pc.
• Standard Accessories : 1 set
• Chuck Wrench (K-231) : 1 pc.
• Pin Wrench (K-233) : 1 pc.
Optional Accessories:
• CHC Collet Chucks ø1/16", 3/32", & 3.0mm
This NSK Nakanishi 90° Angle attachment comes with a ø1/8" (ø3.175 mm) Collet Chuck. This NSK Nakanishi attachment is most suitable for polishing flat surfaces, corners and internal surfaces of pipes with paper disk mounted on rubber pad.
Note: When using the IC-300 with a Rotus system you must use a Speed Reducer.
Maximum Allowable Speed: 35,000rpm Max (Intermittent Use)
Maximum Allowable Speed: 20,000rpm Max (Continuous Use)
• Reduction Ratio : 3/4
• Weight : 1.6 oz.
• Collet Chuck Standard Size : ø1/8" (CHC-3.175)
• NSK Catalog Number: RE10182
Includes:
• Collet Chuck ø1/8" (CHC-3.175) : 1 pc.
• Standard Accessories : 1 set
• Chuck Wrench (K-231) : 1 pc.
• Pin Wrench (K-233) : 1 pc.
Optional Accessories:
• CHC Collet Chucks ø1/16", 3/32", & 3.0mm
Note: When using the IC-300 with a Rotus system you must use a Speed Reducer.
Maximum Allowable Speed: 35,000rpm Max (Intermittent Use)
Maximum Allowable Speed: 20,000rpm Max (Continuous Use)
• Reduction Ratio : 3/4
• Weight : 1.6 oz.
• Collet Chuck Standard Size : ø1/8" (CHC-3.175)
• NSK Catalog Number: RE10182
Includes:
• Collet Chuck ø1/8" (CHC-3.175) : 1 pc.
• Standard Accessories : 1 set
• Chuck Wrench (K-231) : 1 pc.
• Pin Wrench (K-233) : 1 pc.
Optional Accessories:
• CHC Collet Chucks ø1/16", 3/32", & 3.0mm