NSK Nakanishi HTS Ultra-High Speed Air Turbine Milling Spindle
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
HTS Series Features
• High-Speed 150,000 rpm.
• Suitable cutting tool diameter; less than R0.5mm Ball End Mill.
• Negligible spindle expansion; Air Turbine mechanism has extremely low heat generation. Only a minimal warm up time is required ex. 1-2 min. Up to cutting tool R x 0.1 mm depth of cut is possible.
• Very High Feed Rates are possible.
• Highly stable milling conditions are possible with very small diameter cutting tools. Usable max. cutting tool diameter: Ball End Mill R0.5 mm, Square End Mill Ø1 mm.
• Dramatically shorten mold cavity machining time.
Specifications
• Speed: 150,000 rpm (71PSI)
• Max. Output Power: 25W
• Air Type: Side Air Supply Type
• Shank: Straight, BT30 / 40 / 50, HSK E25 / 32 / 40 / 50 /
A63 / F63.
• Proper Air Pressure: 42-71PSI
• Air Consumption: 3.18CFM
• Spindle Accuracy: within 1µm.
• Hose Diameter: Intake Air ø6.0 mm (O.D.) - 6 ft.,
• Standard Size Collet (CHA-4.0): Ø4.0mm.
Included Equipment
• Collet Chuck ø4mm (CHA-4.00): 1 pc. each
• Chuck Nut (CHN-A): 1 pc.
• Hose (K-247): ø6 mm x 13 ft.
• Filter Joint(FJ-01)
• Wrench (8 x 5), (9 x 11): 1 pc. each
HTS Series Features
• High-Speed 150,000 rpm.
• Suitable cutting tool diameter; less than R0.5mm Ball End Mill.
• Negligible spindle expansion; Air Turbine mechanism has extremely low heat generation. Only a minimal warm up time is required ex. 1-2 min. Up to cutting tool R x 0.1 mm depth of cut is possible.
• Very High Feed Rates are possible.
• Highly stable milling conditions are possible with very small diameter cutting tools. Usable max. cutting tool diameter: Ball End Mill R0.5 mm, Square End Mill Ø1 mm.
• Dramatically shorten mold cavity machining time.
Specifications
• Speed: 150,000 rpm (71PSI)
• Max. Output Power: 25W
• Air Type: Side Air Supply Type
• Shank: Straight, BT30 / 40 / 50, HSK E25 / 32 / 40 / 50 /
A63 / F63.
• Proper Air Pressure: 42-71PSI
• Air Consumption: 3.18CFM
• Spindle Accuracy: within 1µm.
• Hose Diameter: Intake Air ø6.0 mm (O.D.) - 6 ft.,
• Standard Size Collet (CHA-4.0): Ø4.0mm.
Included Equipment
• Collet Chuck ø4mm (CHA-4.00): 1 pc. each
• Chuck Nut (CHN-A): 1 pc.
• Hose (K-247): ø6 mm x 13 ft.
• Filter Joint(FJ-01)
• Wrench (8 x 5), (9 x 11): 1 pc. each