Foredom® MS10005 Motor & Handpiece Oiler, 0.25 oz.
Rated 3.5/5 based on 11 customer reviews

Foredom® MS10005 Motor & Handpiece Oiler, 0.25 oz.

Add Your Review
Availability: In Stock
Product SKU: F10005
Prop 65
Warning

This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.

$5.00

Foredom® MS10005 Motor & Handpiece Oiler, contains 0.25 oz. (7.7mL) of high grade machine oil in a hypodermic dispenser for lubrication of Foredom® Motors and Handpieces. The dispenser has a 1″ long needle with a rubber stopper cap for convenient dispensing.

Please note, the lubrication information included below is for reference only, always refer to your operation manual prior to lubrication of any equipment or tools.

 

Lubricating Motors: Current Foredom® motors (not the shaft and sheath but the motor itself) should NEVER be lubricated, however the following older models do require routine lubrication:

  1. Series CC, DD and MM sleeve bearing motors
  2. Series EE, GG, and MMG motors
  3. Series R and RB motors

Lubricating Handpieces:

  1. Duplex spring handpieces (H.8D, H.10D, H.15D, H.18D, H.20D, H.52D, H.55D and H.56D) all require lubrications in the duplex spring component.
  2. H.10 Quick Change handpiece requires lubrication after first 2-3 months of use
  3. H.15 Hammer handpiece requires periodic lubrication
  4. H.55A and H.56A Angle handpieces require periodic lubrication

 

WARNING: Failure to follow these warnings can result in serious injury or damage to equipment. (1) Read & understand all operation instructions / manuals before using this tool. (2) Read the Safety Data Sheets (SDS), prior to use.

Foredom® MS10005 Motor & Handpiece Oiler, contains 0.25 oz. (7.7mL) of high grade machine oil in a hypodermic dispenser for lubrication of Foredom® Motors and Handpieces. The dispenser has a 1″ long needle with a rubber stopper cap for convenient dispensing.

Please note, the lubrication information included below is for reference only, always refer to your operation manual prior to lubrication of any equipment or tools.

 

Lubricating Motors: Current Foredom® motors (not the shaft and sheath but the motor itself) should NEVER be lubricated, however the following older models do require routine lubrication:

  1. Series CC, DD and MM sleeve bearing motors
  2. Series EE, GG, and MMG motors
  3. Series R and RB motors

Lubricating Handpieces:

  1. Duplex spring handpieces (H.8D, H.10D, H.15D, H.18D, H.20D, H.52D, H.55D and H.56D) all require lubrications in the duplex spring component.
  2. H.10 Quick Change handpiece requires lubrication after first 2-3 months of use
  3. H.15 Hammer handpiece requires periodic lubrication
  4. H.55A and H.56A Angle handpieces require periodic lubrication

 

WARNING: Failure to follow these warnings can result in serious injury or damage to equipment. (1) Read & understand all operation instructions / manuals before using this tool. (2) Read the Safety Data Sheets (SDS), prior to use.