Artco M-1071 Replacement Parts
Artco M-1071 Replacement Parts
Availability:
In Stock
Product SKU:
RA19
Prop 65
Warning
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
$1.50
This partner to the M-1036 RAX handpiece, the heavier duty Right- Angle handpiece accommodates tools with shanks up to 1/4" diameter. Popular for mold cavity work as well as larger engine cylinder porting. The right-angle head does not extend as with the M-1036 version. The head size is ~0.91" diameter x 2"long. Includes 1/8" and 1/4" diameter collets, and wrenches. Other sized diameter collets are available below. Please note: Quantities are limited on the 3.0mm and 6.0mm diameter collets.
For extended life, the beveled gears in the angle head should be regularly lubricated with a bearing grease.
Please Note: Part # RA31 the Small Gear used to be mounted with a spring pin.
The Manufacturer has since discontinued this spring pin and now recommends using a few drops of Loctite #603 retaining compound to hold the Gear in place.
Replacement parts listed below.
For extended life, the beveled gears in the angle head should be regularly lubricated with a bearing grease.
Please Note: Part # RA31 the Small Gear used to be mounted with a spring pin.
The Manufacturer has since discontinued this spring pin and now recommends using a few drops of Loctite #603 retaining compound to hold the Gear in place.
Replacement parts listed below.
| Pos. No. |
Description |
Catalog Number |
|---|---|---|
| 19 |
Retainer Ring |
RA19 |
| 20 |
R.A. Head with Brass Washer |
RA20 |
| 20A |
Brass Washer for R.A. Head |
RA20A |
| 21 |
Center Housing |
RA21 |
| 22 |
Threaded Bushing |
RA22 |
| 23 |
Collet Spindle |
RA23 |
| 24 |
Brass Bushing for R.A. Head |
RA24 |
| 25 |
Snap Ring |
RA25 |
| 26 |
Ball Bearing - (Rear Retainer) |
RA26 |
| 27 |
Large Gear with Mounting Screw |
RA27 |
| 28 |
Ball Bearing - (Front Collet) | RA28 |
| 29 |
Aluminum Housing with Spring Clip and Ball |
RA29 |
| 30 |
Drive Nut - Key |
RA30 |
| 31 |
Small Gear (requires) Loctite #603 |
RA31 |
| 32 |
Ball Bearing - (Main Spindle) | RA32 |
| 33 |
Main Spindle |
RA33 |
| 35 |
3/32" dia Collet |
RA35 |
| - - - - | 3.0mm dia Collet | RA36A |
| 36 |
1/8" dia Collet |
RA36 |
| - - - - | 6.0mm dia Collet | RA37A |
| 37 |
1/4" dia Collet |
RA37 |
| - - - - |
Collet Wrench |
RACW |
| - - - - |
Allen Wrench |
RAAW |
| - - - - |
Collet and Allen Wrench Set |
RAAWS |
| - - - - |
Special Pin Wrench |
RAPW |
This partner to the M-1036 RAX handpiece, the heavier duty Right- Angle handpiece accommodates tools with shanks up to 1/4" diameter. Popular for mold cavity work as well as larger engine cylinder porting. The right-angle head does not extend as with the M-1036 version. The head size is ~0.91" diameter x 2"long. Includes 1/8" and 1/4" diameter collets, and wrenches. Other sized diameter collets are available below. Please note: Quantities are limited on the 3.0mm and 6.0mm diameter collets.
For extended life, the beveled gears in the angle head should be regularly lubricated with a bearing grease.
Please Note: Part # RA31 the Small Gear used to be mounted with a spring pin.
The Manufacturer has since discontinued this spring pin and now recommends using a few drops of Loctite #603 retaining compound to hold the Gear in place.
Replacement parts listed below.
For extended life, the beveled gears in the angle head should be regularly lubricated with a bearing grease.
Please Note: Part # RA31 the Small Gear used to be mounted with a spring pin.
The Manufacturer has since discontinued this spring pin and now recommends using a few drops of Loctite #603 retaining compound to hold the Gear in place.
Replacement parts listed below.
| Pos. No. |
Description |
Catalog Number |
|---|---|---|
| 19 |
Retainer Ring |
RA19 |
| 20 |
R.A. Head with Brass Washer |
RA20 |
| 20A |
Brass Washer for R.A. Head |
RA20A |
| 21 |
Center Housing |
RA21 |
| 22 |
Threaded Bushing |
RA22 |
| 23 |
Collet Spindle |
RA23 |
| 24 |
Brass Bushing for R.A. Head |
RA24 |
| 25 |
Snap Ring |
RA25 |
| 26 |
Ball Bearing - (Rear Retainer) |
RA26 |
| 27 |
Large Gear with Mounting Screw |
RA27 |
| 28 |
Ball Bearing - (Front Collet) | RA28 |
| 29 |
Aluminum Housing with Spring Clip and Ball |
RA29 |
| 30 |
Drive Nut - Key |
RA30 |
| 31 |
Small Gear (requires) Loctite #603 |
RA31 |
| 32 |
Ball Bearing - (Main Spindle) | RA32 |
| 33 |
Main Spindle |
RA33 |
| 35 |
3/32" dia Collet |
RA35 |
| - - - - | 3.0mm dia Collet | RA36A |
| 36 |
1/8" dia Collet |
RA36 |
| - - - - | 6.0mm dia Collet | RA37A |
| 37 |
1/4" dia Collet |
RA37 |
| - - - - |
Collet Wrench |
RACW |
| - - - - |
Allen Wrench |
RAAW |
| - - - - |
Collet and Allen Wrench Set |
RAAWS |
| - - - - |
Special Pin Wrench |
RAPW |
Customer Reviews
No reviews yet
Write a review
