Foredom® K.5400 Woodcarving Kit, TX Motor


Foredom® K.5400 Woodcarving Kit, TX Motor

Add Your Review
Availability: In Stock
Product SKU: K.5400
Prop 65
Warning

This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.

$563.78

Foredom® K.5400 Deluxe Woodcarving Kit contains the M.TX motor, one of Foredom®'s most powerful motors as well as a variety of tool combinations for virtually any woodcarving applications. The kit contains just about everything needed to get to work: motor, speed control, handpiece and accessories. When purchased with a motor hanger, such as MAMH-1, you are ready to go straight out of the box!

Foredom® K.5400 Deluxe Woodcarving Kit contains a M.TX motor, C.SXR metal foot operated control, H.44T handpiece, 27 PC accessory kit, and "Fur, Feathers, and Fins" Instructional DVD. Motor and Speed Control carry a 2-Year Limited Warranty. Further information on each component included in the kit is below:

 

  1. Series TX Motor: Foredom®’s most powerful flex shaft machines with 1/3 HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom®'s interchangeable handpieces. Foredom®’s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.
  2. C.SXR Speed Control: The C.SXR looks the same as our standard foot operated control but it has electronics that convert AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor’s shielded-type plug. The C.SXR offers the same electronics and smooth control as the C.TXR but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 7″ long, 5″ wide, 2-1/2″ high, 6 lb/2.7 kg packaged wt.
  3. H.44T Handpiece:  This collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a key tip compatible handpiece.
  4. AKWK53 Accessory Kit: 27-pc. assortment with 3/32″, 1/8″ and 1/4″ shank accessories. It includes many unique items from Foredom- ScotchBrite Radial Bristle Discs, Purple Ceramic Sanding Bands and Discs, Typhoon Burs, V Stones, CeramCut Blue Stones, and more.
  5. Fur, Feathers, and Fins: 3 disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3 hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve. These DVDs are currently formatted only for viewing in the US, Canada and US Territories. Foredom® is in the process of having them formatted for international viewing.
  6. MS10006 Flexible shaft grease

 

WARNING: Failure to follow these warnings can result in serious injury or damage to equipment. (1) Read & understand all operation instructions / manuals before using this tool. (2) Read the Safety Data Sheets (SDS), prior to use.

Foredom® K.5400 Deluxe Woodcarving Kit contains the M.TX motor, one of Foredom®'s most powerful motors as well as a variety of tool combinations for virtually any woodcarving applications. The kit contains just about everything needed to get to work: motor, speed control, handpiece and accessories. When purchased with a motor hanger, such as MAMH-1, you are ready to go straight out of the box!

Foredom® K.5400 Deluxe Woodcarving Kit contains a M.TX motor, C.SXR metal foot operated control, H.44T handpiece, 27 PC accessory kit, and "Fur, Feathers, and Fins" Instructional DVD. Motor and Speed Control carry a 2-Year Limited Warranty. Further information on each component included in the kit is below:

 

  1. Series TX Motor: Foredom®’s most powerful flex shaft machines with 1/3 HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom®'s interchangeable handpieces. Foredom®’s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.
  2. C.SXR Speed Control: The C.SXR looks the same as our standard foot operated control but it has electronics that convert AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor’s shielded-type plug. The C.SXR offers the same electronics and smooth control as the C.TXR but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 7″ long, 5″ wide, 2-1/2″ high, 6 lb/2.7 kg packaged wt.
  3. H.44T Handpiece:  This collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a key tip compatible handpiece.
  4. AKWK53 Accessory Kit: 27-pc. assortment with 3/32″, 1/8″ and 1/4″ shank accessories. It includes many unique items from Foredom- ScotchBrite Radial Bristle Discs, Purple Ceramic Sanding Bands and Discs, Typhoon Burs, V Stones, CeramCut Blue Stones, and more.
  5. Fur, Feathers, and Fins: 3 disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3 hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve. These DVDs are currently formatted only for viewing in the US, Canada and US Territories. Foredom® is in the process of having them formatted for international viewing.
  6. MS10006 Flexible shaft grease

 

WARNING: Failure to follow these warnings can result in serious injury or damage to equipment. (1) Read & understand all operation instructions / manuals before using this tool. (2) Read the Safety Data Sheets (SDS), prior to use.