Foredom® K.5200 Deluxe Woodcarving Kit, SR Motor


Foredom® K.5200 Deluxe Woodcarving Kit, SR Motor

Add Your Review
Availability: In Stock
Product SKU: K.5200
Prop 65
Warning

This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.

$640.97

Foredom® K.5200 Deluxe Woodcarving Kit contains the M.SR motor, one of Foredom's most popular and versatile motors as well as a variety of tool combinations for virtually any woodcarving applications. The kit contains just about everything needed to get to work: motor, speed control, handpiece and accessories. When purchased with a motor hanger, such as MAMH-1, you are ready to go straight out of the box!

 

 

Foredom® K.5200 Deluxe Woodcarving Kit contains M.SR motor, C.SCT metal foot control, H.44T and H.28 handpieces, 27 PC accessory kit, and "Fur, Feathers, and Fins" Instructional DVD. Motor and Speed Control carry a 2-Year Limited Warranty. Further information on each component included in the kit is below:

  1. Series SR Motor: The M.SR is on of Foredom®’s most popular and versatile motors. The 1/6 HP, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors – 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom®’s key tip compatible handpieces.
  2. C.SCT Speed Control: Offers the same electronics and smooth control as the C.FCT but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 7″ long, 5″ wide, 2-1/2″ high, 6 lb/2.7 kg packaged wt.
  3. H.44T Handpiece: collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a key tip compatible handpiece.
  4. H.28 Handpiece: collet style handpiece that comes supplied with 3/32″ and 1/8″ collets. It has a very slender design and tapered front grip that is only 1/2″ in diameter. It can be held in a “pencil grip” fashion for very close work in hard-to-reach places. The H.28 is a key tip compatible handpiece.
  5. AKWK53 Accessory Kit:  27-pc. assortment with 3/32″, 1/8″ and 1/4″ shank accessories. It includes many unique items from Foredom- ScotchBrite Radial Bristle Discs, Purple Ceramic Sanding Bands and Discs, Typhoon Burs, V Stones, CeramCut Blue Stones, and more.
  6. Fur, Feathers, and Fins: 3 Disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3  hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve. These DVDs are currently formatted only for viewing in the US, Canada and US Territories. Foredom is in the process of having them formatted for international viewing.
  7. MS10006 Flexible shaft grease

 

WARNING: Failure to follow these warnings can result in serious injury or damage to equipment. (1) Read & understand all operation instructions / manuals before using this tool. (2) Read the Safety Data Sheets (SDS), prior to use.

Foredom® K.5200 Deluxe Woodcarving Kit contains the M.SR motor, one of Foredom's most popular and versatile motors as well as a variety of tool combinations for virtually any woodcarving applications. The kit contains just about everything needed to get to work: motor, speed control, handpiece and accessories. When purchased with a motor hanger, such as MAMH-1, you are ready to go straight out of the box!

 

 

Foredom® K.5200 Deluxe Woodcarving Kit contains M.SR motor, C.SCT metal foot control, H.44T and H.28 handpieces, 27 PC accessory kit, and "Fur, Feathers, and Fins" Instructional DVD. Motor and Speed Control carry a 2-Year Limited Warranty. Further information on each component included in the kit is below:

  1. Series SR Motor: The M.SR is on of Foredom®’s most popular and versatile motors. The 1/6 HP, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors – 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom®’s key tip compatible handpieces.
  2. C.SCT Speed Control: Offers the same electronics and smooth control as the C.FCT but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 7″ long, 5″ wide, 2-1/2″ high, 6 lb/2.7 kg packaged wt.
  3. H.44T Handpiece: collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work. The H.44T is a key tip compatible handpiece.
  4. H.28 Handpiece: collet style handpiece that comes supplied with 3/32″ and 1/8″ collets. It has a very slender design and tapered front grip that is only 1/2″ in diameter. It can be held in a “pencil grip” fashion for very close work in hard-to-reach places. The H.28 is a key tip compatible handpiece.
  5. AKWK53 Accessory Kit:  27-pc. assortment with 3/32″, 1/8″ and 1/4″ shank accessories. It includes many unique items from Foredom- ScotchBrite Radial Bristle Discs, Purple Ceramic Sanding Bands and Discs, Typhoon Burs, V Stones, CeramCut Blue Stones, and more.
  6. Fur, Feathers, and Fins: 3 Disc DVD set with in-depth instruction for beginning woodcarvers as well as detailed tips for more advanced power woodcarvers who want to enhance their technique. Filmed at the Vermont studio of renowned carver, Frank Russell, Fur, Feathers, & Fins shows the many steps involved in bringing simple blocks of tupelo wood to life. In over 3  hours of video material, Frank walks you through the set up of his work space, the tools he uses, safety concerns and lots more. He covers in great detail the carving of 3 different animal projects: A Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Frank’s congenial manner and accomplished teaching style lend to the enjoyment of learning to carve. These DVDs are currently formatted only for viewing in the US, Canada and US Territories. Foredom is in the process of having them formatted for international viewing.
  7. MS10006 Flexible shaft grease

 

WARNING: Failure to follow these warnings can result in serious injury or damage to equipment. (1) Read & understand all operation instructions / manuals before using this tool. (2) Read the Safety Data Sheets (SDS), prior to use.