Same day shipping on most orders
NSK Nakanishi RAS101 90° Angle Spindle
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information on this product, please refer to the SDS file. For more information on Prop 65, please visit www.p65warnings.ca.gov.
The NSK Nakanishi RAS101 90° Angle Spindle has a wide chucking range up to ø1/4" (ø6 mm) and is suitable for installations where space restrictions exist.
• Maximum allowable motor speed for the spindle: 20,000rpm
• Maximum rotating speed at the cutting tool: 7,490rpm
• Spindle Accuracy: Within 2 μm
• Standard Size Collet Chuck (CHK-3.175): ø1/8"
• Weight: 11.46 oz.
• NSK Catalog Number: AS51094 (RAS100)
• Replaces older RAS-100 spindle)
Standard Equipment:
• Collet Chuck ø1/8" (CHK-3.175) : 1 pc.
• Chuck Nut (K-265) : 1 pc.
• Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc.
Optional Equipment:
• Collet Chuck (CHK-[][]): ø0.5 mm~ø6.0 mm in 0.1 mm increments and ø2.35mm, ø1/8", ø1/4"
• Chuck Nut (K-265): For Collet Chuck (CHK)
• Metal Saw Arbor (KCH-03): For ø0.24" (I.D.) x ø1.18" (O.D.)
• Drill Chuck Arbor (DCH-J0K): For Jacob's Taper No. 0
• Grindstone Arbor (AGM-03): For grinding wheel with I.D. of ø5 mm
The NSK Nakanishi RAS101 90° Angle Spindle has a wide chucking range up to ø1/4" (ø6 mm) and is suitable for installations where space restrictions exist.
• Maximum allowable motor speed for the spindle: 20,000rpm
• Maximum rotating speed at the cutting tool: 7,490rpm
• Spindle Accuracy: Within 2 μm
• Standard Size Collet Chuck (CHK-3.175): ø1/8"
• Weight: 11.46 oz.
• NSK Catalog Number: AS51094 (RAS100)
• Replaces older RAS-100 spindle)
Standard Equipment:
• Collet Chuck ø1/8" (CHK-3.175) : 1 pc.
• Chuck Nut (K-265) : 1 pc.
• Wrench (12 x 14) : 2 pcs., (20 x 24) : 1 pc.
Optional Equipment:
• Collet Chuck (CHK-[][]): ø0.5 mm~ø6.0 mm in 0.1 mm increments and ø2.35mm, ø1/8", ø1/4"
• Chuck Nut (K-265): For Collet Chuck (CHK)
• Metal Saw Arbor (KCH-03): For ø0.24" (I.D.) x ø1.18" (O.D.)
• Drill Chuck Arbor (DCH-J0K): For Jacob's Taper No. 0
• Grindstone Arbor (AGM-03): For grinding wheel with I.D. of ø5 mm